PATTON ELECTRONICS COMPANY
1012A (DUAL PORT)
Card Type |
Short Range Modem |
Chip Set |
Unidentified |
I/O Options |
25-pin serial port (RS-232), network interface via RJ-45, or RJ-11 connectors (2) |
Wiring Type |
Unshielded twisted pair |
Maximum Data Rate |
38.4Kbps |
Data Bus |
External |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
DTE/DCE serial port (25-pin connector) |
CN1 |
UTP interface - secondary (RJ-45 or RJ-11) |
CN3 | |||
UTP interface - primary (RJ-45 or RJ-11) |
CN2 | |||||
Note: Secondary twisted pair connector used to facilitate daisy chaining |
USER CONFIGURABLE SETTINGS | ||
Setting |
Label |
Position |
DTE mode |
SW1 |
On |
DCE mode |
SW1 |
Off |
RTS/DCD CONTROL | ||
DCE |
DTE |
JP1 |
Carrier forced high |
Carrier forced high |
Open |
Carrier activated by RTS - pin 4 |
Carrier activated by DCD - pin 8 |
Closed |