DIGICOM SPA

TINTORETTO LAN

Card Type

ISDN LAN

Chip Set

Unidentified

I/O Options

Power, RJ-45 connectors (4)

ISDN Rate

128Kbps

Maximum Fax Rate

ISDN Modulation Protocol

14.4Kbps

V.110, V.120, PPP, MLPPP

Error Correction/Compression

V.42bis

Fax Class

Class I

Data Bus

External

CONNECTIONS

Function

Label

Function

Label

DC power

CN1

HUB LAN port (RJ-45 connector)

CN4

Configuration port (RJ-45 connector)

CN2

ISDN interface (RJ-45 connector)

CN5

PC LAN port (RJ-45 connector)

CN3

   

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

PWR

Green

On

Power is on and diagnostic test has been passed

PWR

Green

Blinking

Power is on. Device is in BOOT mode and is flashing EPROM

PWR

Red

On

Power is on. Device failed diagnostic test

PWR

Yellow

On

Device is loading firmware in RAM

PWR

Yellow

Blinking

Device is in BOOT mode

PWR

N/A

Off

Power is off

LAN

Green

On

LAN is connected and forwarding

LAN

Red

On

LAN connection is broken

LAN

Yellow

On

LAN is connected but not forwarding.

B1

Green

On

ISDN B1 channel is active; in data mode

B1

Yellow

On

ISDN B1 channel is active, but not compressing data

B1

Red

On

ISDN B1 channel connection is being established

B1

N/A

Off

ISDN B1 channel is inactive

B2

Green

On

ISDN B2 channel is active; in data mode

B2

Yellow

On

ISDN B2 channel is active, but not compressing data

B2

Red

On

ISDN B2 channel connection is being established

B2

N/A

Off

ISDN B2 channel is inactive

 

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

E, Q, V, W

&C, &R, &Z

S Registers

S3, S4, S12, S25, S26

 

Note: See MHI Help File for full command documentation.

PROPRIETARY AT COMMAND SET

For a full command summary, see DIGICOM SPA TINTORETTO EXTERNAL