ADTRAN
DSU III ARC
Card Type |
DSU |
Chip Set |
Unidentified |
I/O Options |
25-pin DTE ports, V.35 DTE port, dedicated network port (RJ-48), power |
Maximum Data Rate |
64Kbps |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Dedicated network port (RJ-48) |
CN1 |
Power |
CN4 |
25-pin DTE port |
CN2 |
Power switch |
SW1 |
V.35 DTE port |
CN3 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
RS |
Unidentified |
On |
RTS signal high |
RS |
Unidentified |
Off |
RTS signal low |
CS |
Unidentified |
On |
CTS signal high |
CS |
Unidentified |
Off |
CTS signal low |
TD |
Unidentified |
On |
Data is being transmitting from DTE |
TD |
Unidentified |
Off |
Data is not being transmitting from DTE |
RD |
Unidentified |
On |
Data is being received from network |
RD |
Unidentified |
Off |
Data is not being received from network |
CD |
Unidentified |
On |
Frame synchronization is established. Device is ready to transmit/receive data |
CD |
Unidentified |
Off |
Frame synchronization is not established. Device is not ready to transmit/receive data |
ALM |
Unidentified |
On |
Open loop, loss of frame synchronization, dial backup mode, or problem with dial backup line alarm condition detected on network |
ALM |
Unidentified |
Off |
Open loop, loss of frame synchronization, dial backup mode, or problem with dial backup line alarm condition not detected on network |
TST |
Unidentified |
On |
Device is conducting a test |
TST |
Unidentified |
Off |
Device is not conducting a test |