ASCEND COMMUNICATIONS, INC.
PIPELINE 85
Card Type |
ISDN to Ethernet Router |
Chip Set |
Unidentified |
I/O Options |
Power connector, 9-pin serial port, RJ-45 UTP interface (4), RJ-11 telephone port (2), RJ-45 ISDN BRI interface (U or S/T) |
Ethernet Transfer Rate |
10Mbps |
ISDN Rate |
Unidentified |
ISDN Modulation Protocol |
PPP, MP, MP+ |
Error Correction/Compression |
Unidentified |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Power |
CN1 |
10 BaseT Ethernet interface (RJ-45) |
CN6 |
9-pin serial port |
CN2 |
RJ-11 line 1 |
CN7 |
10 BaseT Ethernet interface (RJ-45) |
CN3 |
RJ-11 line 2 |
CN8 |
10 BaseT Ethernet interface (RJ-45) |
CN4 |
ISDN BRI interface (RJ-45) |
CN9 |
10 BaseT Ethernet interface (RJ-45) |
CN5 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
PWR |
Unidentified |
On |
Power is on |
PWR |
Unidentified |
Off |
Power is off |
ACT |
Unidentified |
Blinking |
Data is being transmitted/received on Ethernet interface |
ACT |
Unidentified |
Off |
Data is not being transmitted/received on Ethernet interface |
COL |
Unidentified |
Blinking |
Collisions are being detected on Ethernet interface |
COL |
Unidentified |
Off |
Collisions are not being detected on Ethernet interface |
WAN |
Unidentified |
On |
WAN session is active |
WAN |
Unidentified |
Blinking |
Error detected on BRI interface |
WAN |
Unidentified |
Off |
Connection is broken on BRI interface |
CON |
Unidentified |
On |
Unit is connected to power source; power-up test in progress |
CON |
Unidentified |
Off |
Unit is not connected to power source; power-up test not in progress |