ADC KENTROX
PACESETTER MODELS 76920, 76921, 76922
|
Card Type |
ISDN to Ethernet router |
|
Processor |
Motorola 68360 |
|
Processor Speed |
Unidentified |
|
Chipset |
Unidentified |
|
Maximum Onboard Memory |
1MB DRAM/1MB Flash RAM |
|
I/O Options |
Serial port |
|
Network Transfer Rate |
10Mbps |
|
ISDN Transfer Rate |
56Kbps/64Kbps x 2 |
|
ISDN Protocol |
PPP |
|
Switch Type |
5ESS, NET-3, NI-1, NTT |
|
Data Bus |
Serial |
|
Error Correction/Compression |
LZS |
|
Topology |
Star |
|
Wire Type |
Unshielded twisted pair |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
V.35, X.21 or RS-232 serial X.25 WAN port via 10-pin USOC jack |
CN1 |
ISDN S/T interface |
CN4 |
|
RS-232 serial control port via RJ-45 jack |
CN2 |
Unshielded twisted pair connector |
CN5 |
|
Not used |
CN3 |
DC power in |
CN6 |
|
Note:Standard serial port connectors are provided on included adapter cables. Model 76922 does not provide X.25 support on CN1. | |||
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
| » |
WAN port is V.35 or X.21 interface |
JB1 |
Pins 1 & 2 closed |
|
WAN port is RS-232 interface |
JB1 |
Pins 2 & 3 closed | |
| » |
Flash RAM normal operation |
JP1 |
Closed |
|
Flash RAM reset to factory defaults |
JP1 |
Open | |
| » |
Boot from ROMs |
JP2 |
Pins 1 & 2, 3 & 4 closed |
|
Boot from Flash RAM |
JP2 |
Pins 1 & 3, 2 & 4 closed | |
| » |
S/T interface terminated |
JP3 |
Pins 1 & 2, 3 & 4 closed |
|
S/T interface not terminated |
JP3 |
Open | |
|
Note:Jumper block JB1 is a one-piece shunt. All pins 1 & 2 or all pins 2 & 3 are closed. CN1 can be either an X.21 or an RS-232 interface on Model 76922. On all other models it is either a V.35 interface or an RS-232 interface. | |||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
STA1 |
Unidentified |
On |
Unshielded twisted pair connection is good |
|
STA1 |
Unidentified |
Off |
Unshielded twisted pair connection is broken |
|
TXD |
Unidentified |
Blinking |
Router is transmitting data to the Ethernet network |
|
TXD |
Unidentified |
Off |
Router is not transmitting data to the Ethernet network |
|
RXD |
Unidentified |
Blinking |
Router is receiving data from the Ethernet network |
|
RXD |
Unidentified |
Off |
Router is not receiving data from the Ethernet network |
|
STA2 |
Unidentified |
On |
ISDN connection is good |
|
STA2 |
Unidentified |
Off |
ISDN connection is broken |
|
D |
Unidentified |
On |
ISDN D channel is active |
|
D |
Unidentified |
Off |
ISDN D channel is inactive |
|
B1 |
Unidentified |
On |
ISDN B1 channel is active |
|
B1 |
Unidentified |
Blinking |
Call is being initiated on ISDN B1 channel |
|
B1 |
Unidentified |
Off |
ISDN B1 channel is inactive |
|
B2 |
Unidentified |
On |
ISDN B2 channel is active |
|
B2 |
Unidentified |
Blinking |
Call is being initiated on ISDN B2 channel |
|
B2 |
Unidentified |
Off |
ISDN B2 channel is inactive |
|
WAN |
Unidentified |
Off |
WAN port connection active |
|
WAN |
Unidentified |
On |
WAN port connection inactive |
|
CTRL |
Unidentified |
Off |
Control port connection active |
|
CTRL |
Unidentified |
On |
Control port connection inactive |