TECMAR
WANGTEK TS420C
Device Type |
Internal Tape Drive |
Interface |
SCSI |
Format |
QICWide, Travan TR-4 |
Sustained Transfer Rate |
Unidentified |
Size |
3.5 in. half height (5.25 in. half height with bezel) |
View |
Top |
USER CONFIGURABLE SETTINGS | |||
Setting |
Label |
Position | |
» |
Inquiry String Emulation Mode enabled |
Pins 7 & 8 |
Closed |
Inquiry String Emulation Mode disabled |
Pins 7 & 8 |
Open | |
» |
Compression enabled |
Pins 9 & 10 |
Closed |
Compression disabled |
Pins 9 & 10 |
Open | |
» |
Termination enabled |
Pins 11 & 12 |
Closed |
Termination disabled |
Pins 11 & 12 |
Open | |
» |
Factory configured - do not alter |
Pins 13 & 14 |
Unidentified |
Note: Inquiry String Emulation Mode works in conjuction with the software driver. When enabled, the drive responds to system inquiries as a Wangtek Model 51000. |
DRIVE SELECT ID | ||||
Drive ID |
JP1/Pins 1 & 2 |
JP1/Pins 3 & 4 |
JP1/Pins 5 & 6 | |
0 |
Open |
Open |
Open | |
1 |
Closed |
Open |
Open | |
2 |
Open |
Closed |
Open | |
3 |
Closed |
Closed |
Open | |
» |
4 |
Open |
Open |
Closed |
5 |
Closed |
Open |
Closed | |
6 |
Open |
Closed |
Closed | |
7 |
Closed |
Closed |
Closed |
MANUFACTURERS RECOMMENDED MEDIA | ||
Tape |
Capacity Without Compression |
Capacity With Compression |
QICWide |
2.0GB |
4.0GB |
Travan 4 |
4.0GB |
8.0GB |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Green |
On |
Drive ready/cartridge loaded and initialized |
LED1 |
Green |
Slow Flash |
Drive is active or a cartridge is being initialized |
LED1 |
Green |
Fast Flash |
Drive firmware is being downloaded and updated or a drive fault has occurred |
LED1 |
Green |
Off |
Drive not active |