NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus
Wiring Type	Shielded twisted pair Unshielded twisted pair AUI transceiver via DB-15 port
Boot ROM	Available

CABLE TYPE
Jumper	JPA - JPH
Shielded/Unshielded twisted pair	Pins 1 & 2 closed
AUI transceiver via DB-15 port	Pins 2 & 3 closed

DIAGNOSTIC LED(S)
LED	Status	Condition
LED1	On	Power on
LED1	Off	Card is not receiving power, the fuse is blown, or cable type is twisted pair.
LED2	On	Twisted pair network connection is good
LED2	Off	Twisted pair network connection is broken
Note:LED2 will only function is the cable type is twisted pair.

I/O BASE ADDRESS
Address		JP2	JP3	JP4	JP5	JP6
»	300h	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2
	000h	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3
	020h	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3
	040h	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3
	060h	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3
	080h	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3
	0A0h	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3
	0C0h	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3
	0E0h	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3
	100h	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3
	120h	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3
	140h	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3
	160h	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3
	180h	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3
	1A0h	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3
	1C0h	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3
	1E0h	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3
	200h	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2
	220h	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2
	240h	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2
	260h	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2
	280h	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2
	2A0h	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2
	2C0h	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2
	2E0h	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2
	320h	Pins 1 & 2	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2
	340h	Pins 2 & 3	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2
	360h	Pins 1 & 2	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2
	380h	Pins 2 & 3	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
	3A0h	Pins 1 & 2	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
	3C0h	Pins 2 & 3	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
	3E0h	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
Note:Pins designated should be in the closed position.

BOOT ROM
Setting		JP7
»	Disabled	Pins 2 & 3 closed
	Enabled	Pins 1 & 2 closed

BASE MEMORY ADDRESS - FIRST DIGIT
Address Segment	JP8	JP9	JP10	JP11
0h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
1h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
2h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
3h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
4h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
5h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
6h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
7h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
8h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
9h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
Ah	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
Bh	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
Ch	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
Dh	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
Eh	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
Fh	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
Note:The Address Segment is the first digit in the Base Memory Address. Refer to the next table for the remaining three digits in the address. Note that not all configurable addresses are valid on all systems.

BASE MEMORY ADDRESS - LAST THREE DIGITS
Address	ROM Size	JP11	JP12	JP30
x000h	8K x 8	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
x200h	8K x 8	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
x400h	8K x 8	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
x600h	8K x 8	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
x800h	8K x 8	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
xA00h	8K x 8	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
xC00h	8K x 8	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
xE00h	8K x 8	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
x000h	16K x 8	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
x400h	16K x 8	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
x800h	16K x 8	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
xC00h	16K x 8	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
x000h	32K x 8	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
x800h	32K x 8	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
x000h	64K x 8	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
Note:Place the three digit address given here behind the single digit given in the previous table to get the complete Base Memory Address.