Card Type	Network Interface Card
NIC Type	Ethernet
Boot ROM	Available
Network Transfer Rate	100Mbps
Topology	Star
Wiring Type	Fiber optic cable
Data Bus	32-bit PCI

CONNECTIONS
Function	Label	Function	Label
Fiber optic connector (ST) - transmit	CN1	Fiber optic connector (ST) - receive	CN2

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LINK	Green	On	Network connection is good
LINK	Green	Off	Network connection is broken
FULL	Red	On	NIC operating in full-duplex mode
FULL	Red	Off	NIC not operating in full-duplex mode
ACT	Red	Blinking	Data is being transmitted/received
ACT	Red	Off	Data is not being transmitted/received
COL	Red	Blinking	A collision condition has occurred
COL	Red	Off	No collision has been detected