IBM CORPORATION
PC NETWORK ADAPTER II (BROADBAND)
NIC Type |
Broadband |
Transfer Rate |
Unidentified |
Data Bus |
8-bit ISA |
Topology |
Star |
Wiring Type |
RG-11/U RG-59A/U coaxial |
Boot ROM |
Not Available |
INTERRUPT REQUEST SELECTION | ||
IRQ |
JP1 | |
» |
2 |
Pins 1 & 2 closed |
3 |
Pins 2 & 3 closed |
I/O ADDRESS SELECTION | ||
Address |
JP4 | |
» |
620h |
Pins 1 & 2 closed |
628H |
Pins 2 & 3 closed |
BASE MEMORY ADDRESS SELECTION | ||
Address |
JP5 | |
» |
CC00h |
Pins 1 & 2 closed |
DC00h |
Pins 2 & 3 closed |
ROM BIOS CONFIGURATION | ||
» Setting |
JP7 | |
» |
Disabled |
Pins 2 & 3 closed |
» |
Enabled |
Pins 1 & 2 closed |
BOOT ROM | ||
» Setting |
JP6 | |
» |
Disabled |
Pins 1 & 2 closed |
» |
Enabled |
Pins 2 & 3 closed |
MISCELLANEOUS TECHNICAL NOTES |
The DMA channel is permanently fixed at 3. If two adapters will be installed into one station then disable the ROM BIOS on the second adapter. |