DANPEX CORPORATION
ET-103
Card Type |
Transceiver |
NIC Type |
Ethernet |
Data Bus |
AUI via DB-15 port |
Network Transfer Rate |
10Mbps |
Topology |
Linear Bus |
Wiring Type |
Thick coaxial via tap connector |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
AUI via DB-15 port |
CN1 |
Tap connector for thick coaxial cable |
CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting |
Label |
Position | |
» |
SQE test disabled |
JP1 |
Pins 1 & 2 closed |
SQE test enabled |
JP1 |
Pins 2 & 3 closed | |
» |
Transmit lines not terminated |
JP2 |
Pins 1 & 2 closed |
Transmit lines terminated with 78 ohms |
JP2 |
Pins 2 & 3 closed |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
PWR |
Unidentified |
On |
Power is on |
PWR |
Unidentified |
Off |
Power is off |
TX |
Unidentified |
Blinking |
Transceiver is transmitting to network |
TX |
Unidentified |
Off |
Transceiver is not transmitting to network |
RX |
Unidentified |
Blinking |
Transceiver is receiving from network |
RX |
Unidentified |
Off |
Transceiver is not receiving from network |
CD |
Unidentified |
Blinking |
Collision has been detected |
CD |
Unidentified |
Off |
Collision has not been detected |
SQE |
Unidentified |
On |
SQE test is enabled |
SQE |
Unidentified |
Off |
SQE test is disabled |