BREEZECOM
SA-10 PRO
Card Type |
Network Interface Card |
NIC Type |
Ethernet |
Boot ROM |
Not available |
Radio Data Rate |
3Mbps |
Network Transfer Rate |
1.6Mbps |
Topology |
Ad-hoc, infrastructure |
Wiring Type |
Unshielded twisted pair |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
RJ-45 UTP connector |
CN1 |
DC power connector |
CN3 |
Monitor connector |
CN2 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified |
On |
Power is on |
LED1 |
Unidentified |
Off |
Power is off |
LED2 |
Unidentified |
Blinks |
Radio interference is present |
LED2 |
Unidentified |
Off |
No radio interference |
LED3 |
Unidentified |
On |
Data is being transmitted over Ethernet |
LED3 |
Unidentified |
Off |
Data is not being transmitted over Ethernet |
LED4 |
Unidentified |
On |
Receiving traffic from 9 or more stations |
LED4 |
Unidentified |
Off |
Receiving traffic from less than 9 stations |
LED5 |
Unidentified |
On |
Receiving traffic from 5-8 stations |
LED5 |
Unidentified |
Off |
Receiving traffic from less than 5 stations |
LED6 |
Unidentified |
On |
Receiving traffic from 1-4 stations |
LED6 |
Unidentified |
Off |
No traffic being received |
MISCELLANEOUS TECHNICAL NOTES |
Unit may have two pre-installed antenna, or configured with two connectors for external antenna. |