ACCTON TCHNOLOGY CORPORATION
ETHERPAIR PCMCIA
| Card Type | Network Interface Card | 
| NIC Type | Ethernet | 
| Maximum Onboard Memory | 16KB | 
| Boot ROM | Unidentified | 
| Network Transfer Rate | 10Mbps | 
| Topology | Star | 
| Wiring Type | Unshielded twisted pair | 
| Data Bus | PCMCIA | 
 
| CONNECTIONS | |||
| Function | Label | Function | Label | 
| RJ-45 connector | CN1 | 15-pin flat connector | CN2 | 
| DIAGNOSTIC LED(S) | |||
| LED | Color | Status | Condition | 
| Tx/Rx | Green | On | Data is being transmitted/received | 
| Tx/Rx | Green | Off | Data is not being transmitted/received | 
| LINK | Green | On | UTP link is good | 
| LINK | Green | Off | UTP link is broken | 
| Note: Exact locations of LEDs are unidentified. | |||
| MISCELLANEOUS TECHNICAL NOTES | 
| Note: The ferrite bead should be clamped over the module cable as close as possible to 15-pin flat connector. |