COMPAQ COMPUTER CORPORATION
PROLIANT 5000R
Processor |
Pentium Pro |
Processor Speed |
166/200MHz |
Chip Set |
Unidentified |
Video Chip Set |
Unidentified |
Maximum Onboard Memory |
4GB |
Maximum Video Memory |
Unidentified |
Cache |
256/512KB (located on Pentium Pro CPU) |
BIOS |
Unidentified |
Dimensions |
Unidentified |
I/O Options |
Fast SCSI-2 interface, parallel port, PS/2 mouse port, serial ports (2), RJ-45 connector, VGA port |
NPU Options |
None |
34409
CONNECTIONS |
Note: The location of the connectors is unidentified. |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
On board video enabled |
S1/1 |
Off |
On board video disabled |
S1/1 |
On | |
» |
Chassis configuration lock enabled |
S1/2 |
Off |
Chassis configuration lock disabled |
S1/2 |
On | |
» |
System installed in a tower chassis |
S1/3 |
Off |
System installed in a rack chassis |
S1/3 |
On | |
» |
System boot from floppy controlled through configuration settings |
S1/4 |
Off |
System boot from floppy drive regardless of configuration settings |
S1/4 |
On | |
» |
Password enabled |
S1/5 |
Off |
Password disabled |
S1/5 |
On | |
» |
CMOS memory normal operation |
S1/6 |
Off |
CMOS memory clear |
S1/6 |
On |
DIMM CONFIGURATION |
Note: The configuration of the 4GB memory is unidentified. |
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium Pro CPU. |
VIDEO MEMORY CONFIGURATION |
Note: The size of the video memory is unidentified. |
DRIVE SELECTION | |||
SCSI ID |
ID0 |
ID1 |
ID2 |
5 |
On |
Off |
On |
6 |
Off |
On |
On |
MONITOR SELECTION NOTE |
Note: The Proliant 5000R is capable of controlling up to 8 servers, each with their own monitor. To select a monitor type for a specific server, first consult either the 4 or 8 Port Monitor Control Selection Table to determine which switches are used for the configuration.. Then refer to the Server Monitor Selection table to determine the individual switch settings. |
4 PORT MONITOR CONTROL SELECTION | ||
Switch |
Controlling switches |
Server controlled |
S1 |
SW1/1 - 4 |
1 |
S1 |
SW1/5 - 8 |
2 |
S2 |
SW2/1 - 4 |
3 |
S2 |
SW2/5 - 8 |
4 |
8 PORT MONITOR CONTROL SELECTION | ||
Switch |
Controlling switches |
Server controlled |
S1 |
SW1/1 - 4 |
1 |
S1 |
SW1/5 - 8 |
2 |
S2 |
SW2/1 - 4 |
3 |
S2 |
SW2/5 - 8 |
4 |
S3 |
SW3/1 - 4 |
5 |
S3 |
SW3/5 - 8 |
6 |
S4 |
SW3/1 - 4 |
7 |
S4 |
SW3/5 - 8 |
8 |
SERVER MONITOR SELECTION | ||||
Type |
SW1/1 orSW1/5 |
SW1/2 orSW1/6 |
SW1/3 orSW1/7 |
SW1/4 orSW1/8 |
VGA |
Off |
Off |
On |
Off |
Monochrome |
Off |
Off |
On |
Off |
VGA |
Off |
On |
Off |
Off |
SVGA |
Off |
On |
Off |
Off |
SVGA- Compaq 430 |
On |
On |
Off |
On |
XVGA – IBM8512 |
Off |
On |
Off |
Off |
XVGA – IBM8513 |
Off |
On |
Off |
Off |
XVGA – IBM8514 |
On |
On |
Off |
Off |
XVGA – IBM8515 |
On |
Off |
Off |
Off |
Note: Each bank of switches must reflect the type of monitor configured on the server. |
MISCELLANEOUS TECHNICAL NOTE |
Note: Diagram not available. |