C P - 3 5 0 4 CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 1807| 987| | Capacity form/unform 510/ MB Heads 12| 16| | Seek time / track 12.0/ 3.0 ms Sector/track | 63| | Controller IDE / AT Precompensation Cache/Buffer 256 KB SEGMENTED Landing Zone Data transfer rate 2.000 MB/S int Bytes/Sector 512 8.000 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 60 Power: sleep W Humidity % 8 80 | 8 80 standby W Altitude km -0.061 3.048| 12.192 idle 4.4 W Shock g 5 | 50 seek 6.8 W Rotation RPM 4500 read/write 4.9 W Acoustic dBA 40 spin-up W ECC Bit MTBF h 150000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** CONNER CP3504 CUSTOMER OPTIONS +-------------------------------------------------------+ | *** |XX J2 | SS,DSP |XX I | +-+ |XX N | | | |XX T | | | |XX E | | | |XX R | +-+ |XX F | |XX A | |XX C +---+ |XX E 1+-Sync Spindle 1XX 2|xLED | |x| | |XX J4 |x| | E1-E3 |XX Power +-+ | +++++ |XX +---+ ++++C/D | 1 +-------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** CONNER CP3504 CUSTOMER OPTIONS Jumper Setting ============== C/D Master/Slave ---------------- The C/D jumper is used to determine whether the drive is a master (drive C) or slave (drive D). The drive is configured as a master (drive C) when jumpered and as a slave drive (D drive) when not jumpered. DSP & SS -------- This pair of jumpers determines the signals on pin 39 of the inter- face connector. +-------------+---------------------------------------------------+ | Jumper |Description | |DSP |SS | | +------+------+---------------------------------------------------+ |CLOSED|OPEN |- spindle synchronization signal is disabled on | | | | pin 39 | | | |- activity LED signal available on pin 39 | | | |- Must be in place for CAM/ATA drives | +------+------+---------------------------------------------------+ |OPEN |CLOSED|- spindle synchronization signal enabled on pin 39 | | | |- activity LED signal disabled from pin 39 | +------+------+---------------------------------------------------+ |OPEN |OPEN |- pin 39 floating | +------+------+---------------------------------------------------+ E1/E2/E3 -------- E1 Disable Spin Up until command received E2 and E3 NOT USED! J4 DC Power and pin connector assignments ------------------------------------------- +-------------------- | +-----J4-----+ pin 1 +12 VDC | | 1 2 3 4 | pin 2 +12 Volts Return | +------------+ pin 3 + 5 Volts Return +----------------- pin 4 + 5 VDC ********************************************************************** I N S T A L L ********************************************************************** CONNER CP3304/3504 CUSTOMER OPTIONS Mounting Holes -------------- Side: 6-32 UNC-2B .12 Max. Insertion Bottom: 6-32 UNC-2B .25 Max. Insertion