7 1 3 3 6 A P MAXTOR NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 2595| | Capacity form/unform 1330/ MB Heads 4| 16| | Seek time / track 12.0/ 2.0 ms Sector/track | 63| | Controller IDE / ATA2 FAST/ENHA Precompensation Cache/Buffer 128 KB SEGMENTED Landing Zone Data transfer rate 5.000 MB/S int Bytes/Sector 512 8.100 MB/S ext PIO4 Recording method RLL 1/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 71 Power: sleep 1.0 W Humidity % 5 95 | 5 95 standby 1.3 W Altitude km -0.061 3.048| idle 4.4 W Shock g 34 | 100 seek 7.0 W Rotation RPM 4480 read/write 5.0 W Acoustic dBA 38 spin-up 9.7 W ECC Bit ON THE FLY MTBF h 300000 Warranty Month 36 Lift/Lock/Park YES Certificates CSA,TUV,UL478,VDE ********************************************************************** L A Y O U T ********************************************************************** MAXTOR 72004/71670/71336-A/AP INSTALLATION STEPS +---------------------------------------------------------+ | J20***** | | COMPONENT SIDE ***** |XXI | |XXN | |XXT | |XXE | |XXR | |XXF | |XXA | |XXC | |XXE | |XX | |XX | |XX | | 1 | 1XX Power | |XX +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** MAXTOR 72004/71670/71336-A/AP INSTALLATION STEPS Jumper Setting ============== Jumper Designation ------------------ +---------------- J20 | +------------- J21 RESERVED! | | +---------- J22 RESERVED! * * * * * * * * * * | | | +---- J24 RESERVED! +------- J23 RESERVED! +-----------------------+------+ | | J20 | +-----------------------+------+ | Master/Slave | | | Only Drive in system |CLOSED|(default) | Master |CLOSED| | Slave |OPEN | +-----------------------+------+ NOTE Jumpers J21 to J24 are factory reserved. DC Power connector ------------------ pin 1 +12 VDC pin 2 +12 Volts Return pin 3 + 5 Volts Return pin 4 + 5 VDC