Q1/95
Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - drive active LED	CN1
40-pin IDE (AT) Interface connector	CN2
34-pin control cable connector - floppy drive	CN3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	J1	Pins 1 & 2 closed
	Floppy drive disabled	J1	Pins 2 & 3 closed
»	HDD enabled	J2	Pins 1 & 2 closed
	HDD disabled	J2	Pins 2 & 3 closed
»	Standard I/O check ready signal	J3	Pins 1 & 2 closed
	Delayed I/O check ready signal	j3	Pins 2 & 3 closed