PM-171 (PRO-MASTER)

PROCOMP USA, INC.

PM-171 (PRO-MASTER)

Data Bus

32-bit EISA

Card Size

Full-height, Half-length

Hard Drives supported

Up to 7 SCSI-2 devices

Floppy drives supported

Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS

Function

Location

Function

Location

50-pin SCSI connector - external

P1

4-pin connector - drive active LED

P4

34-pin cable connector - floppy drive

P2

UPS jack (only on some models)

P5

50-pin SCSI connector - internal

P3

FLOPPY CONTROLLER CONFIGURATION

Setting

JP2/Pins 1 & 2

JP2/Pins 3 & 4

JP2/Pins 5 & 6

»
Enabled by hardware

Closed

Open

Open

Configured by EISA configuration utility

Open

Closed

Open

Disabled by hardware

Open

Open

Closed

USER CONFIGURABLE SETTINGS

Setting

JP1

»
Termpower supplied by adapter to SCSI bus enabled

Pins 1 & 2 closed

Termpower supplied by adapter to SCSI bus disabled

Pins 2 & 3 closed

Notes: On the board, JP1/pins 1 & 2 correspond to the "’ON’ to center-pin" position; JP1/pins 2 & 3

correspond to the "center-pin to ‘OFF’" position.

Data Bus	32-bit EISA
Card Size	Full-height, Half-length
Hard Drives supported	Up to 7 SCSI-2 devices
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - external	P1	4-pin connector - drive active LED	P4
34-pin cable connector - floppy drive	P2	UPS jack (only on some models)	P5
50-pin SCSI connector - internal	P3

FLOPPY CONTROLLER CONFIGURATION
Setting		JP2/Pins 1 & 2	JP2/Pins 3 & 4	JP2/Pins 5 & 6
»	Enabled by hardware	Closed	Open	Open
	Configured by EISA configuration utility	Open	Closed	Open
	Disabled by hardware	Open	Open	Closed

USER CONFIGURABLE SETTINGS
Setting		JP1
»	Termpower supplied by adapter to SCSI bus enabled	Pins 1 & 2 closed
	Termpower supplied by adapter to SCSI bus disabled	Pins 2 & 3 closed
	Notes: On the board, JP1/pins 1 & 2 correspond to the "’ON’ to center-pin" position; JP1/pins 2 & 3 correspond to the "center-pin to ‘OFF’" position.