Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin AT Interface (IDE) connector	J1
34-pin control cable connector-floppy drive	J2
4-pin connector-Drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IRQ connected directly to host	JP2	pins 2 & 3 closed
	IRQ Buffer mode enabled	JP2	pins 1 & 2 closed
»	Zero wait state disabled	JP3	open
	Zero wait state enabled	JP3	closed
»	Floppy drive enabled	JP4	closed
	Floppy drive disabled	JP4	open