CMS ENHANCEMENTS, INC.
HCWD3VSR2/HCWD6VSR2
| |
Data bus: |
16-bit ISA |
Size: |
Three-quarter length, full-height card |
Hard drive supported: |
Two RLL ST412 drives |
Floppy drives supported: |
320KB, 360KB, 720KB, 1.2MB, 1.44MB |
CONNECTIONS | |
Function |
Location |
34-pin control cable connector - floppy drive |
J1 |
20-pin data cable connector - drive 1 |
J3 |
20-pin data cable connector - drive 0 |
J4 |
34-pin control cable connector - hard drive |
J5 |
External LED connector |
J6 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
» |
Latched hard disk mode enabled |
W1/A |
open |
Non-latched hard disk mode enabled |
W1/A |
closed | |
» |
Four byte ECC enabled |
W1/B |
open |
Seven byte ECC enabled |
W1/B |
closed | |
» |
Caching enabled |
W1/C |
open |
Caching disabled |
W1/C |
closed | |
» |
BIOS enabled |
W2 |
open |
BIOS disabled |
W2 |
closed |
USER CONFIGURABLE SETTINGS(CONTINUED) | |||
Function |
Location |
Setting | |
» |
Primary hard disk I/O address select |
W3 |
open |
Alternate hard disk I/O address select |
W3 |
closed | |
» |
Primary floppy drive I/O address select |
W4 |
open |
Alternate floppy drive I/O address select |
W4 |
closed | |
» |
Single speed floppy drive mode enabled |
W5 |
open |
Dual speed floppy drive mode enabled |
W5 |
closed |