Data bus:	16-bit ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE(AT) drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives

CONNECTIONS
Function	Location
40-pin primary IDE(AT) connector	J1
34-pin cable connector - floppy drive	J2
4-pin connector - drive active LED	J3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IDE(AT) interface is primary	J4A	Pins 1 & 2 closed
	IDE(AT) interface is secondary	J4A	Pins 2 & 3 closed
»	IDE(AT) IRQ 14 select	J4B	Pins 1 & 2 closed
	IDE(AT) IRQ 15 select	J4B	Pins 2 & 3 closed
»	IDE(AT) interface is enabled	J4C	Pins 1 & 2 closed
	IDE(AT) interface is disabled	J4C	Pins 2 & 3 closed
»	Floppy drive interface enabled	J4D	Pins 1 & 2 closed
	Floppy drive interface disabled	J4D	Pins 2 & 3 closed