S D - 3 4 0 - 0 4 TEAC NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders 1050| | | Capacity form/unform 43/ MB Heads 2| | | Seek time / track 23.0/10.0 ms Sector/track 40| | | Controller SCSI1 SINGLE-ENDED Precompensation Cache/Buffer 28 KB Landing Zone Data transfer rate 1.000 MB/S int Bytes/Sector 512 2.000 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 50 | -40 60 Power: sleep W Humidity % 8 80 | 8 80 standby W Altitude km -0.300 3.000| -0.300 12.000 idle W Shock g 5 | 70 seek W Rotation RPM 2358 read/write W Acoustic dBA 45 spin-up W ECC Bit MTBF h 30000 Warranty Month Lift/Lock/Park - Certificates CSA,TUV,UL478 ********************************************************************** L A Y O U T ********************************************************************** TEAC SD-340-04 SPECIFICATION P/N 10530487-00 S0 S3 + +------+ + | ----+-------------------------------+------+------+-+-------+- | | |:::::::::::::::::::::::::::::::::::::::::::::| |XXXXXXX| | | +1--------------------------------------------+ +Power--+ | | Signal Connector | +------- -------+ | | +------------------------------------------------------------------+ +------------------------------------------------------------------+ | | | | | | | +-+Indicator LED | | +-+ | +------------------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** TEAC SD-340-04 SPECIFICATION P/N 10530487-00 Jumper Setting ============== SCSI ID ------- S0, S1, S2 shorted SCSI ID = 0 (Factory setting) Parity check ------------ S3 shorted Execution of parity check (Factory setting) Terminator factory setting: Equipped ********************************************************************** I N S T A L L ********************************************************************** TEAC SD-340-04 SPECIFICATION P/N 10530487-00 Notes on installation ===================== Drive mounting -------------- horizontally vertically +-----------------+ +--+ +--+ +------------------+ | | | +-----+ +-----+ | | | x | | | | | | | | x+----------------+x +-+-----------------+-+ | | | | | | ||x x|| +---------------------+ | | | | | | || x x || | | | | | | || x x || x x | | | | | | || x x || +------x------x-------+ | +-----+ +-----+ | || xx || +-+------x--x-------+-+ +--+ +--+ || x x || | xx | || x x || | x x | || x x || +---x--------x----+ |x x| x x x++----------------++x UNACCEPTABLE! UNACCEPTABLE! Note: Any direction of installation other than above should be de- termined spearately by arrangement. Mounting Holes -------------- 10-M3 tapped holes for installation (Bottom x4, each side x 3). Front Bezel ----------- Black, Part No. 16145890-00 LED Indicator ------------- Green Power Interface Connectors -------------------------- HDD Side Connector AMP P/N 171826-4 (natural color) or equivalent Number of pins 4 Prevention method for mis-connection Mechanical protection of the shape of the connector housing Cable side matched connector AMP P/N 171822-4 (natural color) or equivalent Matched pin AMP P/N 170204-2 (AWG 20 26, loose piece) or P/N 170262-2 (AWG 20 to 26, chained form), or equivalent Power cable The maximum power consumption of the HDD and the voltage at the power connector shall be taken into consideration. ********************************************************************** F E A T U R E S ********************************************************************** TEAC SD-340-04 SPECIFICATION P/N 10530487-00 Seek Time --------- +----------------------------------+--------+ | | 340-04 | +----------------------------------+--------+ |Track-to-Track msec. typ. | 10 | +----------------------------------+--------+ |Average msec. typ. | 23 | | msec. max. | 50 | +----------------------------------+--------+ |Latency msec. avg. | 12.7 | +----------------------------------+--------+ Interleave ---------- 1:1 (fixed) Data buffer ----------- 28,672 Bytes (512 x 56) Safety standards ---------------- (applied to the model P/N 19307371-XX only) UL approved (standard UL478) CSA approved (standard C22.2 No. 220) T V approved (standard VDE0806/IEC380) International CSA approved (standard IEC380/IEC435)