D 5 7 0 BULL AG NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 5.25"/FH Cylinders 976| | | Capacity form/unform 57/ 70 MB Heads 7| | | Seek time / track 30.0/ 5.0 ms Sector/track 17| | | Controller MFM / ST412 Precompensation 65535 Cache/Buffer KB Landing Zone Data transfer rate 0.625 MB/S int Bytes/Sector 512 0.625 MB/S ext Recording method MFM operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle W Shock g | seek W Rotation RPM 3600 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 11000 Warranty Month Lift/Lock/Park NO Certificates ********************************************************************** L A Y O U T ********************************************************************** BULL D570 SPS 7 72A7 89MT The shunt block J6 is located on the Data board (low board) next to the connector J1. +--J6--++------+ | ++ | Radial 1+------R-------+16 Shipped Open | | Auto Track 2+--------------+15 Used in factory Seek | | 3+--------------+14 | | 4+--------------+13 | | +- 5+-----DS4------+12 | | | Select +- 6+-----DS3------+11 Shorted Shunts selects drive Unit --+ | | +- 7+-----DS2------+10 | | | +- 8+-----DS1------+9 | | +--------------+ ********************************************************************** J U M P E R S ********************************************************************** BULL D570 SPS 7 72 A7 89MT Jumper setting ============== J6 Shunt Block -------------- 01-16 : radial connection alway selected 02-15 : auto-access during MST, the drive performs a repetitive series of moves. 03-14 : without meaning 04-13 : without meaning 05-12 : unit 4 LUN 3 06-11 : unit 3 LUN 2 (one out of four straps may be used to 07-10 : unit 2 LUN 1 select the unit) 08-09 : unit 1 LUN 0 Standard Position D570 on OMTI 20C (in easy-box or no) Only straps 4-13 and 6-11 are set. Choice explainable by the use of a D570 disk drive indicated under unit number 3. The adaptator-terminator 220/330 Ohms is always in RP1 location. D570 on DTC540E and OMTI5400 Straps 4-13 and 8-9 are present for the livery disk drive with the streamer; the extensions disks will be strapped with the next unit number. Adaptator-terminator 220/330 in RP1 in first and last unit in the daisy-chain. NB: In configurations with D570 and Maxtor we must respect rules for each disk drive type. J3 DC Power and pin connector assignments ------------------------------------------ +------------+ pin 1 +12 V +/- 1,2 V | 4 3 2 1 | pin 2 OV +------------+ pin 3 OV pin 4 + 5 V +/- 0,2 V ********************************************************************** I N S T A L L ********************************************************************** BULL D570 SPS 7 72 A7 89MT Notes on installation ===================== Drive mounting -------------- horizontally vertically +-----------------+ +--+ +--+ +------------------+ | | | +-----+ +-----+ | | | x | | | | | | | | x+----------------+x +-+-----------------+-+ | | | | | | ||x x|| +---------------------+ | | | | | | || x x || | | | | | | || x x || x x | | | | | | || x x || +------x------x-------+ | +-----+ +-----+ | || xx || +-+------x--x-------+-+ +--+ +--+ || x x || | xx | || x x || | x x | || x x || +---x--------x----+ |x x| x x x++----------------++x UNACCEPTABLE! UNACCEPTABLE! Never install PC board on the Top! ********************************************************************** F E A T U R E S ********************************************************************** BULL D570 SPS 7 72 A7 89MT The D570 disk drive is a Winchester technology hard disk with Seagate ST506/412 interface, compatible with BULL D506 and 510 disk drives. Seek Time --------- | D570 | ----------------------------------+--------+ Track-to-Track msec. typ. | 5 | Average msec. typ. | 30 | Average msec. max. | 65 | ----------------------------------+--------+ Defects ------- A copy of the defective track list must accompany the unit for use during formatting.