SEAGATE TECHNOLOGY, INC.

ST07A, ST08A

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two IDE (AT) Interface drives

Floppy drives supported: ST07A: None

ST08A: Two 360KB, 720KB, 1.2MB, or 1.44MB

CONNECTIONS

Function

Location

40-pin AT Interface (IDE) control cable connector-internal

J1

34-pin data cable connector-floppy drive (ST08A only)

J2

4-pin connector-drive active LED

J3

5-pin connector-DC power

J4

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Port addresses are 1F0-1F7, 3F6-3F7 3F0-3F5, 3F7h

JP2

open

 

Port addresses are 170-177,376-377 370-375, 377h

JP2

closed

»

Floppy drive disabled

JP4

open

 

Floppy drive enabled

JP4

closed

»

IRQ14 is connected directly to the host

JP5

pins 2 & 3 closed

 

IRQ14 to the host is cleared when the drive goes BUSY

JP5

pins 1 & 2 closed

»

I/O channel READY from hard drive is not connected to host

JP6

open

 

I/O channel READY from the hard drive is connected to host

JP6

closed