PLUS DEVELOPMENT CORPORATION

IMPULSE 150A

Data bus:

16-bit ISA

Size:

Half-length, full-height card

Hard drive supported:

Two IDE(AT) drives

Floppy drives supported:

Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS

Function

Location

34-pin cable connector - floppy drive

J1

40-pin IDE(AT) connector

J2

4-pin connector - drive active LED

JP9

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Factory configured - do not alter

JP1

open

»

Factory configured - do not alter

JP2/1-3

open

»

Factory configured - do not alter

JP3/1-3

open

»

Factory configured - do not alter

JP4

open

»

Factory configured - do not alter

JP5

open

»

Polled BIOS

JP6/pins 2 & 3

closed

 

BIOS is interrupt driven

JP6/pins 1 & 2

closed

»

Factory configured - do not alter

JP7

open

»

Floppy drive interface enabled

JP8

closed

 

Floppy drive interface disabled

JP8

open

»

Factory configured - do not alter

JP10

closed