LONGSHINE MICROSYSTEM, INC.
LCS-6622/W
|
|
Data bus: 16-bit, ISA
Size: Full-length, half-height card
Hard drives supported: Two ST506/412 MFM drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector-drive active LED |
CN1 |
|
20-pin data cable connector-drive 1 |
CN2 |
|
20-pin data cable connector-drive 0 |
CN3 |
|
34-pin control cable connector-hard drives |
CN4 |
|
34-pin data cable connector-floppy drives |
CN5 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive port address is 3F0-3F7h |
JP1 |
open |
|
Floppy drive port address is 370-377h |
JP1 |
closed | |
| » |
Hard drive port address is 1F0-1F7h |
JP2 |
open |
|
Hard drive port address is 170-177h |
JP2 |
closed | |
| » |
LCS-6622/W not grounded to host |
JP3 |
open |
|
LCS-6622/W grounded to host |
JP3 |
closed | |
| » |
LED is always lit (Latch mode) |
JP6/jumper 1 |
open |
|
LED lit only when drive is selected (Non-latch mode) |
JP6/jumper 1 |
closed | |
| » |
Four Byte ECC |
JP6/jumper 2 |
open |
| » |
Not used |
JP6/jumper 2 |
closed |
| » |
Format incompatible with WD1003-WAH |
JP6/jumper 3 |
open |
|
Format compatible with WD1003-WAH |
JP6/jumper 3 |
closed | |