LCS-6610HX Rev. 2

LONGSHINE MICROSYSTEM, INC.

LCS-6610HX Rev. 2

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two MFM ST506/412 drives

Floppy drives supported: None

Max. Heads and Cyls.: 16 Heads and 1024 Cyls.

CONNECTIONS

Function

Location

4-pin connector-drive active LED

CN1

20-pin data cable connector-drive 0

CN2

20-pin data cable connector-drive 1

CN3

34-pin control cable connector-hard drive

CN4

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»
Hard drive port address is 1F0-1F7h

JP4

open

Hard drive port address is 170-177h

JP4

closed

»
BIOS other than DTK on host

JP5

closed

DTK BIOS on host

JP5

open

»
LCS-6610HX is not grounded to host

JP7

open

LCS-6610HX is grounded to host

JP7

closed

Note:Jumper JP1, JP3, and JP8 are reserved and must be left "open."JP9 is reserved and must be left pins 1 & 2 "closed."This controller contains no on-board software.

CONNECTIONS
Function	Location
4-pin connector-drive active LED	CN1
20-pin data cable connector-drive 0	CN2
20-pin data cable connector-drive 1	CN3
34-pin control cable connector-hard drive	CN4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive port address is 1F0-1F7h	JP4	open
	Hard drive port address is 170-177h	JP4	closed
»	BIOS other than DTK on host	JP5	closed
	DTK BIOS on host	JP5	open
»	LCS-6610HX is not grounded to host	JP7	open
	LCS-6610HX is grounded to host	JP7	closed
Note:Jumper JP1, JP3, and JP8 are reserved and must be left "open."JP9 is reserved and must be left pins 1 & 2 "closed."This controller contains no on-board software.